Page 6 - Benchmark: HD Tach 3.0.1.0
About HD Tach 3.0.1.0
HD Tach is a low level hardware benchmark for random access read/write storage devices such as hard drives, removable drives (ZIP/JAZZ), flash devices, and RAID arrays. HD Tach uses custom device drivers and other low level Windows interfaces to bypass as many layers of software as possible and get as close to the physical performance of the device possible.
From: Developer's Page
Now, it is the time for good old HD Tach. While HD Tach is more of a 'drag race' than a clear indication of real life performance, and has been around for a really long time, it is an excellent storage performance reference between hard drives for more than the last decade. Back in the days, if your average speed exceeded 60MB/s, you had a seriously fast drive. Where does the Seagate IronWolf Pro ST12000NE0007 12TB come in? With an average read speed of 255.7MB/s and tested random access time of 8.0ms, this is mind-blowingly fast for a mechanical hard drive. But how does it compare against the other products? It is a virtual tie with the Seagate's own BarraCuda Pro 12TB at 256.2MB/s with a 9.2ms access time, but a bit behind the IronWolf 12TB at 267.1MB/s with a 9.0ms access time. Meanwhile, the BarraCuda Pro ST10000DM0004 10TB came in at 243.4MB/s with a 9.4ms access time. The Seagate IronWolf Pro ST12000NE0007 is not only one of the fastest mechanical hard drive ever tested in HD Tach here at APH Networks, it also has the best random access time.
Page Index
1. Introduction, Features, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 3.0
6. Benchmark: HD Tach 3.0.1.0
7. Benchmark: HD Tune Pro 4.60
8. Benchmark: PassMark PerformanceTest 9.0
9. Benchmark: PCMark 7
10. NAS Performance, Power Consumption
11. Conclusion
