Page 6 - Benchmark: HD Tach 3.0.1.0
About HD Tach 3.0.1.0
HD Tach is a low level hardware benchmark for random access read/write storage devices such as hard drives, removable drives (ZIP/JAZZ), flash devices, and RAID arrays. HD Tach uses custom device drivers and other low level Windows interfaces to bypass as many layers of software as possible and get as close to the physical performance of the device possible.
From: Developer's Page
Now, it is the time for good old HD Tach. While HD Tach is more of a 'drag race' than a clear indication of real life performance, and has been around for a really long time, it is an excellent storage performance reference between hard drives for more than the last decade. Back in the days, if your average speed exceeded 60MB/s, you have a seriously fast drive. Where does the Seagate BarraCuda Pro ST10000DM0004 10TB come in? With an average read speed of 243.4MB/s and tested random access time of 9.4ms, this is mind-blowingly fast for a mechanical hard drive. But how does it compare against the other products? It is a virtual tie with the Seagate's own IronWolf 10TB. Meanwhile, the Enterprise Capacity 3.5 HDD V.5 8TB came in at 240.6MB/s with 8.4ms access time. For the Western Digital 6TB drives, the Red Pro WD6001FFWX clocked in at 227.6MB/s, and the Black WD6001FZWX pulled 217.8MB/s in the same test. The Seagate BarraCuda Pro ST10000DM0004 10TB is one of the fastest mechanical hard drive ever tested in HD Tach here at APH Networks, but the Seagate Enterprise drive still has considerably better random access time.
Page Index
1. Introduction, Features, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 3.0
6. Benchmark: HD Tach 3.0.1.0
7. Benchmark: HD Tune Pro 4.60
8. Benchmark: PassMark PerformanceTest 8.0
9. Benchmark: PCMark 7
10. Conclusion
