From Thermaltake Press Release: Thermaltake is thrilled to release the CTE C700 TG ARGB Mid Tower Chassis and the CTE C700 Air Mid Tower Chassis in black and snow versions. The CTE C700 is a compact version of the flagship: CTE C750, featuring the CTE Form Factor design and dual chamber design to provide optimal thermal efficiency to high-end components. With maximum cooling support, the CTE C700 comes not only pre-installed with three of the latest CT140 fans, but it can also accommodate up to 420mm AIO radiators. This series has two models, including the CTE C700 TG ARGB which comes with two tempered glass window panels at the front and left sides and the CTE C700 Air possessing a perforated metal front panel and emphasizing on greater airflow. The CTE C700 is an ideal E-ATX chassis achieving the balance of inner building display and functionality.
The CTE Form Factor design of the CTE C700, which stands for Centralized Thermal Efficiency, aims to generate a more efficient airflow pathway by rotating the motherboard 90 degrees. This design allows the CPU and graphics card, the critical heat sources, to be moved much closer to the ventilation on the front and rear sides of the chassis respectively. Furthermore, combined with the dual chamber design, the CTE C700 has wide-open space for a variety of cooler sizes and can draw air from three directions (front, bottom, and the rear side). With a large cooling capacity, the CTE C700 can house up to twelve 120mm/ eleven 140mm fans in total or 420mm AIO radiators on the front and rear sides. Additionally, out of the box three CT140 ARGB fans are pre-installed in the CTE C700 TG ARGB and three CT140 fans are pre-installed in the CTE C700 Air, these fans are Thermaltake’s new case fans made with specially tuned fan blades, and the 1500 maximum RPM fan can push the air further.
The CTE C700 is a user-friendly chassis that already considers your needs. To ease the cooler installation, the CTE C700 is equipped with fan brackets at the front, bottom, rear sides and also has additional fan brackets located on top of the PCIe slots and behind the motherboard for extra airflow. Moreover, the built-in pump & reservoir bracket on the bottom of the chassis can offer DIY lovers great support for their custom liquid cooling build. On top of that, if you prefer installing a VGA card vertically, you can simply swap the pre-installed PCI-e slots with the vertical VGA mounting kit in the package. To reach superior cable management, you can properly place the components in the huge right chamber separated by the dual chamber design and can tie things up with the Velcro straps and cable ties in the accessory box. Besides that, the removable filters on all the ventilation can protect your system from dust invasion. After finishing the PC build, the 4 mm thick tempered glass panel on the left side of the CTE C700 allows you to fully display your fancy inner components. Aside from that, the CTE C700 comes with two USB 3.0 Type-A, one USB 3.2 Gen 2 Type-C, and one HD audio jack to meet the functional requirements.
Featuring Thermaltake’s innovative CTE Form Factor design, dual chamber design, and high cooler installation capacity, the CTE C700 Mid Tower Chassis series achieves exceptional thermal efficiency. Attributed to high installation flexibility and tempered glass window panels, this chassis can maintain a perfect balance between functionality and aesthetics. No matter if you want to build with advanced hardware, dual AIO configurations, or DIY liquid cooling, the CTE C700 is the ultimate showcase for your battle station!
For more information on the CTE C700:
CTE C700 TG ARGB-https://www.thermaltake.com/cte-c700-tg-argb-mid-tower-chassis.html
CTE C700 TG ARGB Snow-https://www.thermaltake.com/cte-c700-tg-argb-snow-mid-tower-chassis.html
CTE C700 Air-https://www.thermaltake.com/cte-c700-air-mid-tower-chassis.html
CTE C700 Air Snow-https://www.thermaltake.com/cte-c700-air-snow-mid-tower-chassis.html
