Crucial X6 2TB Review (Page 6 of 8)

Page 6 - Benchmark: HD Tach

About HD Tach

HD Tach is a low level hardware benchmark for random access read/write storage devices such as hard drives, removable drives (ZIP/JAZZ), flash devices, and RAID arrays. HD Tach uses custom device drivers and other low level Windows interfaces to bypass as many layers of software as possible and get as close to the physical performance of the device possible.

Now, it is the time for good old HD Tach. While HD Tach is more of a drag race than a clear indication of real life performance and has been around for a really long time, it is an excellent storage performance reference among removable storage drives and has been our favorite benchmark long before internal hard drives even cracked the 50MB/s mark. From that above, I was able to pull a very good 286.0MB/s average. This is better than the LaCie Mobile SSD 500GB's 233.9MB/s average in the same test. As you can see in our screenshot above, the tested latency was 0.1 ms, which is the same as our AIDA64 results on Page 3 of this review. Once again, the performance Crucial X6 2TB was well within expectations for its performance class.

Page Index
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 7.0
6. Benchmark: HD Tach
7. Benchmark: HD Tune Pro 5.70
8. Conclusion