Page 4 - Benchmark: ATTO Disk Benchmark
About ATTO Disk Benchmark
The ATTO Disk Benchmark performance measurement tool is compatible with Microsoft Windows. Measure your storage systems performance with various transfer sizes and test lengths for reads and writes. Several options are available to customize your performance measurement including queue depth, overlapped I/O and even a comparison mode with the option to run continuously. Use ATTO Disk Benchmark to test any manufacturers RAID controllers, storage controllers, host adapters, hard drives and SSD drives and notice that ATTO products will consistently provide the highest level of performance to your storage.
From: Developer's Page
Following up next is our usual ATTO read and write tests. ATTO is one of my favorite benchmarks for quite a while. Ever since we have started using it in my network attached storage reviews many years ago, it has been integral to our battery of storage performance evaluations here at APH Networks -- mainly due to its accuracy, and thorough testing in accordance to varying transfer sizes. As you can see in our graphs above, the SanDisk Ultra Fit 256GB's read performance and write performance was pretty different; peaking at 132.560MB/s and 66.198MB/s, respectively. It met the 130MB/s read speed as advertised, and even though they did not advertise the write speed, both were a considerable improvement over the first generation Ultra Fit 128GB. In fact, the peak write speed was more than twice as high. Under the curve, the SanDisk Ultra Fit 256GB reached maximum performance for everything 128K and above. The ramp up speed profile was pretty like other USB flash drives we have tested here at APH Networks.
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 3.0
6. Benchmark: HD Tach 22.214.171.124
7. Benchmark: HD Tune Pro 4.60