Page 4 - Benchmark: ATTO Disk Benchmark
About ATTO Disk Benchmark
The ATTO Disk Benchmark performance measurement tool is compatible with Microsoft Windows. Measure your storage systems performance with various transfer sizes and test lengths for reads and writes. Several options are available to customize your performance measurement including queue depth, overlapped I/O and even a comparison mode with the option to run continuously. Use ATTO Disk Benchmark to test any manufacturers RAID controllers, storage controllers, host adapters, hard drives and SSD drives and notice that ATTO products will consistently provide the highest level of performance to your storage.
From: Developer's Page
Following up next are our usual ATTO read and write tests. ATTO is an often-quoted benchmark because it is easy to use and accurate. For the most part, it is a favorite among reviewers and I have grown to embrace it as much as the next for the last little while. ATTO uses easily compressible data. As manufacturer peak read and write performance ratings are usually achievable using ATTO, whether a device lives up to its marketing claims or not can be validated by this program. Lexar claims the Professional 1066x SDXC UHS-I Silver 128GB's maximum read and maximum write are pinned at 160MB/s and 120MB/s, respectively. The tested results were close to the advertised figures. It peaked at 152.08MB/s read and 121.62MB/s write. Under the curve, its write speed was consistently faster than both the Kingston SDXC UHS-I U3 64GB and Silicon Power Superior SDXC UHS-I U3 64GB. The read section shared a similar story. Overall, the Lexar Professional 1066x SDXC UHS-I Silver 128GB's performance was excellent compared to other UHS-I cards.
Page Index
1. Introduction, Packaging, Specifications
2. Physical Look - Hardware, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 8.0
6. Conclusion
