Page 7 - Benchmark: HD Tune Pro 4.60
About HD Tune Pro 4.60
HD Tune is a hard disk utility with many functions. It can be used to measure the drive's performance, scan for errors, check the health status (S.M.A.R.T.), securely erase all data and much more.
From: Developer's Page
As always, the final benchmark we used is the HD Tune Pro, and as you can see above, I had to edit my screenshot a bit, because this program does not generate any fancy independent graph outputs in by itself. Chit chat aside, similar to what we have seen earlier, we can observe the sequential line is virtually flat just like before in the HD Tach benchmark. The only thing to be noted from this benchmark is the access time is around the 0.6ms to 0.7ms mark, which corresponds closely to the other tests we have run. While it is not the exact same, due to program and algorithm differences, I would say that 0.643 ms is pretty darn close to the average of 0.7ms. Everything else should be self-explanatory.
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 3.0
6. Benchmark: HD Tach 18.104.22.168
7. Benchmark: HD Tune Pro 4.60