Page 4 - Benchmark: ATTO Disk Benchmark
About ATTO Disk Benchmark
The ATTO Disk Benchmark performance measurement tool is compatible with Microsoft Windows. Measure your storage systems performance with various transfer sizes and test lengths for reads and writes. Several options are available to customize your performance measurement including queue depth, overlapped I/O and even a comparison mode with the option to run continuously. Use ATTO Disk Benchmark to test any manufacturers RAID controllers, storage controllers, host adapters, hard drives and SSD drives and notice that ATTO products will consistently provide the highest level of performance to your storage.
From: Developer's Page
For the second benchmark test, we are going to run ATTO Disk Benchmark. Although this is my first time doing a review on a USB flash drive, this test seems to be one of APH Networks’ favorite. Quoting Senior Technical Editor Preston Yuen, “It provides us with accurate and thorough results with varying transfer sizes.” The peak value obtained from the tests for write speed is 83.624MB/s, which is higher than both the Silicon Power Blaze B05 64GB and Jewel J80 32GB. It is also quite a bit faster than the Patriot Stellar 64GB. Looking across the board for the results of the read speeds for USB 3.0 flash drives, we see the peak value of 119.59MB/s is the most similar with that of the Jewel J80 32GB that peaked at 117.993MB/s. It came in just under the Patriot Stellar, but not by a whole lot.
Page Index
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 3.0
6. Benchmark: HD Tach 3.0.1.0
7. Benchmark: HD Tune Pro 4.60
8. Conclusion
