Page 6 - Benchmark: HD Tach 188.8.131.52
About HD Tach 184.108.40.206
HD Tach is a low level hardware benchmark for random access read/write storage devices such as hard drives, removable drives (ZIP/JAZZ), flash devices, and RAID arrays. HD Tach uses custom device drivers and other low level Windows interfaces to bypass as many layers of software as possible and get as close to the physical performance of the device possible.
From: Developer's Page
After wiping the Toshiba OCZ TL100 240GB with a clean format and ensuring alignment and everything is correct, I fired it up for some testing in HD Tach. HD Tach is more of a 'drag race' than a clear indication of real life performance, and has been around for a really long time. It is an excellent storage performance reference among SSDs with the same controller, and has been our favorite benchmark long before hard drives even cracked the 50MB/s mark. With an average read speed of 343.0MB/s according to HD Tach in single disk configuration, this score is average, but slower than both the OCZ Trion 100 480GB and the OCZ Trion 150 480GB. Just to give some reference, the SanDisk Ultra II 240GB is the fastest single SATA 6Gb/s disk at 469.3MB/s, while the OCZ RD400A 512GB is the record holder at 1109.7MB/s. For most solid state drives, we typically look for something that is faster than 350MB/s, while most drives do not usually crack the 400MB/s line. At the end of the day, HD Tach may not be the best test for solid state drives all the time, but we really cannot argue against the results.
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 3.0
6. Benchmark: HD Tach 220.127.116.11
7. Benchmark: HD Tune Pro 4.60
8. Benchmark: PassMark PerformanceTest 8.0
9. Benchmark: PCMark Vantage
10. Benchmark: PCMark 8