Page 6 - Benchmark: HD Tune Pro 5.70
About HD Tune Pro 5.70
HD Tune Pro is a hard disk / SSD utility with many functions. It can be used to measure the drive's performance, scan for errors, check the health status (S.M.A.R.T.), securely erase all data and much more.
From: Developer's Page
Unfortunately, HD Tune does not generate any fancy independent graph outputs in particular, so I just took a screenshot of the program. The XPG Atom 50 1TB's throughput remained very flat on average. While HD Tune is more of a drag race than a clear indication of real-life performance, it is an excellent storage performance reference among SSDs with the same controller. The results were good across the range; the recorded access time was low, as we would expect from a solid state drive. The Atom 50 1TB posted an average of 2654.3MB/s for its sequential read speed, which was much better than the Crucial P5 Plus 1TB at 2018.0MB/s. This figure was actually comparable to other performance PCIe 4.0-based drives. The WD_BLACK SN850 NVMe SSD 1TB scored 2366.0MB/s, Gammix S70 Blade 1TB posted an average of 2662.4MB/s. and the Kingston KC3000 1TB delivered 2581.8MB/s. At the end of the day, HD Tune may not be the best test for solid state drives all the time, but these results are always interesting to look at.
Page Index
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 8.0
6. Benchmark: HD Tune Pro 5.70
7. Benchmark: PassMark PerformanceTest 10
8. Benchmark: PCMark 10
9. Benchmark: 3DMark
10. Conclusion
