LaCie Rugged SSD 1TB Review (Page 5 of 8)

Page 5 - Benchmark: Crystal Disk Mark

About Crystal Disk Mark

- Measure sequential reads/writes speed
- Measure random 512KB, 4KB, 4KB (Queue Depth=32) reads/writes speed
- Select test data (Random, 0Fill, 1Fill)

From: Developer's Page




The LaCie Rugged SSD 1TB continued to perform exceptionally well as we move into our Crystal Disk Mark sequential read and write results. Once again, it was always at the top or near the top, but this is to be expected given there is an NVMe drive inside. Its sequential read and write results generally reflect what we have seen in the past two pages. At 917.2MB/s sequential read and 967.0MB/s sequential write, it was a bit below and above the advertised numbers this time around, respectively, which is excellent. As we move into the 4KiB Q8T8, 4KiB Q32T1, and Q1T1 territories, which require high input/out operations per second or IOPS, the LaCie Rugged SSD 1TB continued to blow all the other tested USB flash drives out of the water and even led the Crucial X8 1TB in all but one test. Traditionally, this has always been a weak point for USB flash drives and a strong point for solid state drives, as we can see here.


Page Index
1. Introduction, Packaging, Specifications
2. A Closer Look, Test System
3. Benchmark: AIDA64 Disk Benchmark
4. Benchmark: ATTO Disk Benchmark
5. Benchmark: Crystal Disk Mark 6.0
6. Benchmark: HD Tach 3.0.1.0
7. Benchmark: HD Tune Pro 5.70
8. Conclusion